Precautions for slurry pump
Dec 23, 2023
Leave a message
1. Improper assembly of bearings. Reinstall the bearings and shaft, or replace the bearings.
2. The motor shaft is asymmetric or not parallel to the pump shaft. The motor shaft or pump shaft should be adjusted. If the shaft is deformed or bent, replace it directly.
3. There is friction inside the pump or the impeller is out of balance. Friction should be eliminated or replaced with a new impeller.
4. The mismatch of pump characteristics causes pump cavitation, and the pump characteristics are adjusted to match the pipeline characteristics.
5. Local air pockets, adding exhaust valves at the pockets to eliminate air pockets.
6. The shaft sleeve is severely worn and replaced with a new one.
7. The elastic pad of the machine coupling is damaged, replace it with a new one.
