Troubleshooting of slurry pump

The slurry pump uniformly injects the slurry containing cementitious materials into the rock and soil through the slurry pump pipe. Drive away moisture and air from rock cracks or between soil particles through filling, infiltration, and compaction methods. And fill its position, harden it and bond the soil into a whole. Form a new soil with strong, low compressibility, high impermeability, and good stability. High pressure slurry pump can be applied in water conservancy construction and maintenance, agriculture, construction, industry and other occasions.
The characteristics of a small slurry pump include simple and reasonable structure, convenient maintenance, obvious boosting effect, low cost, long service life, small volume, light weight, not easy to block, and wide applicability. Many slurry pumps may have leakage problems, and even if filled with water, it is not easy to discharge the water. Reason: When controlling the speed after the slurry pump is turned on, gases from nature will enter. Then it will slowly fall into the water, so the problem of leakage needs to be solved immediately. In terms of construction, mixed flow pumps and slurry pumps have the same characteristics. Many large mixed flow pumps have powerful characteristics. For example, the slurry pump is relatively stable in operation, has significant economic benefits, is easy to operate, and has a wide range of applications. But its construction is relatively complicated, and compared to axial-flow pumps with equally complex structures, it is difficult to distinguish between high and low quality. And large mixed flow pumps also have special features, such as slurry pumps ensuring safety. The cost incurred at the specified speed is relatively lower. Compared to the adjustable blade type, the slurry pump is slightly better. Especially in pumping stations where the pressure change is not significant. The use of vertical fixed mixed flow pumps can achieve many advantages, such as simple construction, good operation of slurry pumps, convenient repair, and low cost. The slurry pump has protrusions of the same volume, size, and model at the inlet and outlet. And they all revolve around one point, which can be installed on the pipeline like other devices, with the characteristic of convenient installation. Mixed flow pumps have good liquid conveying capacity, and for those small pumps, general operation and maintenance are simple; As for those large pumps, they can reduce the height of excavation, and slurry pumps can greatly reduce the cost of pumping stations.