Negative pressure pump for chemical pumps

Dec 10, 2023

Leave a message

Before starting the pump, the suction pipe and pump must be filled with liquid. After starting the pump, the impeller rotates at high speed, and the liquid inside rotates with the blades. Under the action of centrifugal force, it flies away from the impeller and shoots outward. The velocity of the injected liquid in the diffusion chamber of the pump casing gradually slows down, and the pressure gradually increases. Then, it flows out from the pump outlet and discharge pipe. At this point, a vacuum low-pressure area is formed at the center of the blade due to the liquid being thrown towards the surrounding area, where there is neither air nor liquid. The liquid in the liquid pool flows into the pump through the suction pipe under the action of atmospheric pressure on the pool surface. The liquid is continuously sucked up from the liquid pool and then continuously discharged from the discharge pipe.

Send Inquiry