Maintenance and upkeep of sewage pump
Dec 08, 2023
Leave a message
(1) Check for any looseness in the sewage pump pipeline and joints. Rotate the sewage pump by hand and see if it is flexible.
(2) Add bearing lubricating oil into the bearing body and observe that the oil level should be at the centerline of the oil mark. The lubricating oil should be replaced or replenished in a timely manner.
(3) Unscrew the water inlet plug of the sewage pump body and inject water (or slurry). Self suction sewage pump
(4) Close the gate valve, outlet pressure gauge, and inlet vacuum gauge of the water outlet pipeline.
(5) Jog the motor and check if the direction of rotation is correct.
(6) Start the motor, and when the sewage pump is running normally, open the outlet pressure gauge and the inlet vacuum pump to see that they display appropriate pressure. Gradually open the gate valve and check the motor load condition.
